How to troubleshoot failed SSD?

Though Solid State Drives are different from hard disk drives in terms of structure, SSD drives are also susceptible to errors and failures. The SSD drives contain no moving parts but the flash memory that ultimately leads to issues with the drive. With problems arising with SSD drive, you may find it difficult to access or write any data to it. So, learn how to effectively troubleshoot failed SSD in this post.

Before an SSD storage drive actually dies or fails, it shows up some warning symbols. As a matter of fact, noting these signs can help you take some better actions prior any permanent damages to the data stored in it. Some common signs of SSD failure can be noted below here-

·         Bad block formations

·         Frequent drive crashes

·         File System errors

·         Read/Write errors

The bad blocks are similar to bad sectors formed on a hard disk drive. The SSD’s develop bad blocks that turn the drive sluggish or show up an error on performing a file read operation. Nonetheless, Windows warns you about this as soon as it finds any bad blocks on the de=rive storage.

Along with this, you may find system crash during the boot-up process. You might be then able to start the computer after a several numbers of attempts. Apart from this, your SSD drive can also turn read-only; you will not be able to do any write action onto the SSD drive.

There could also be file system errors that can lead to problems with the SSD drive. A bad drive can give rise to file system error and your Windows or Mac notifies to repair this error. Improper system shutdowns and other power-related issues can cause problems to sold state drives.

How to Troubleshoot?

If the SSD is not working then you need to carefully diagnose the problem with it. Initially, you need to check the connections and the cable. A loose or faulty connection could also be the reasons for SSD errors. For other kinds of failures open up the Device manager and inspect for the issues with the solid state drive.

 

You can also go to the BIOS setup and see if the SSD is been recognized by it or not. Thereafter, you can also run the anti-virus application and scan for errors and malware within the storage drive. However, if it is any hardware issue then you may have to replace the drive

About Author: